MAXIMUM GLAZING SIZES (CLEAR VIEW)
  DOORS SIDELITES WINDOWS, BORROWED LITES
Width 58 3/4" 96" 96"
Height 58 3/4" 96" 96"
Square Inches (Max.) 2747" 4608" 4608"
Stop Height 5/8" 5/8" 5/8"
Listings
Testing completed by Intertek Testing Services Warnock-Hersey certification with ASTM E-2010 (99), NFPA-257, CAN 4S-105, CAN 4S-106, UBC 7-2, 7-4 (1997), UL-9, UL-10C. Test report number WHI 495-1538 and WH1 495-1573.
Labeling
All products are labeled bearing the manufacturers name, testing laboratory, rating and safety standards.
Specifications
All 45 minute fire-rated and impact safety rated glazing shall be designated on the drawings as Pyrobel-45-16, 45 minute fire and safety glazing.
General Characteristics SINGLE SINGLE EXTERIOR INSULATED EXTERIOR
Usage Interior Only Ext. above 120°F, below 5°F Ext. above 120°F, below 5°F
Thickness 5/8" (16mm)
- 0/+ 1.5mm
3/4" (20mm)
+/- 1mm
1 3/8" (6-8-20=34mm)
+/- 2mm
Weight (per sq. ft) 8.2 lbs/sq. ft. (40kg/sq. m2) 9.8 lbs (48kg/m2) 13.12 lbs/sq. ft. (64kg/m2)
Light transmission 85% 83% 74%
Sound reduction Rw= 39 dB Rw= 40 dB Rw= 42 dB
Minimum available sizes No minimum No minimum 12" x 16" (30 x 40 cm)
Safety rating CPSC 16CFR1201 Cat. II, 400 ft. lbs. ANSI Z97.1
Fire rating 45 minutes 45 minutes 45 minutes
R-value 1.09 1.14 1.89
V-value 0.915 0.881 0.528
New York MEA Number
MEA #73-02-M
Pyrobel-45 may be glazed into the following types of doors, sidelites, transoms and window framing with a minimum of a 5/8" stop height: standard hollow metal, Quick-Frame, and other door and framing applications as approved by independent lab testing.
Quality Standard
Pyrobel products are specially prepared products designed to prevent the expansion of fire. Thus, the specific optical quality should not be compared to single float or laminated pvb glazing. Consult InterEdge for specific acceptable quality standards before purchase.
Guarantee
Manufacturer, AGC Flat Glass Europe, guarantees the characteristics of Pyrobel for a period of 5 years from date of delivery. Due to the nature of its interlayers, Pyrobel may develop some minor imperfections such as small bubbles or a slight distortion which will not affect the free vision through the glazing or fire performance. A variation of up to 5% of light transmission or haze shall not be considered a defect. This guarantee is for replacement of glass only and any other costs associated with the removal or replacement of defective units are not the responsibility of the manufacturer. The guarantee shall apply only to glass handled, transported, stored and installed in accordance with normal procedures.
 
      
© 2006 AGC InterEdge Technologies. All rights reserved.
PyroEdge-20, PyroEdge-20 XtraClear and Quick-Frame are trademarks of AGC InterEdge Technologies.
Pyrobel is a trademark of AGC Flat Glass Europe.