| |
TRANSPARENT WALL SYSTEMS |
|
| Width |
88" |
| Height |
88" |
| Square Inches (Max.) |
3828" |
| Stop Height |
1" |
Listings
Testing completed by Intertek Testing
Services Warnock-Hersey certification with ASTM E-119, ASTM E-2010 (99),
NFPA-251, UBC 7-1 (1997), 263, CAN 4S-101. Test report numbers WHI
495-1590. Design Number GSA/WA 120-01. |
Labeling
All product is permanently labeled bearing
the manufacturers name, testing laboratory, rating and safety
standards. |
Specifications
All 120 minute fire-rated and impact
safety rated glass shall be designated on the drawings as
Pyrobel-120-53, 120 minute fire and safety glazing. |
| SINGLE |
SINGLE EXTERIOR |
| Thickness |
2
1/8" (53mm)
+3/-1mm |
2
5/16" (57mm)
+3/-1mm |
| Weight (per sq. ft.) |
24.6 lbs/sq. ft. (120 kg/ sq. m2) |
26.2 lbs/sq. ft. (128kg/ sq. m2) |
| Light Transmission |
71% |
70% |
| Sound Reduction |
Rw= 46 dB |
Rw= 47 dB |
| Safety Rating |
CPSC 16CFR1201 Cat. II, 400 ft. lbs. ANSI Z97.1 |
| Fire Rating | 120 minutes |
120 minutes |
New York MEA Number
MEA #72-02-M
Pyrobel-120-53 for transparent wall systems may be glazed into the
Quick-Frame and other framing systems as approved by independent
testing. |
Quality Standard
Pyrobel products are specially
prepared products designed to prevent the expansion of fire. Thus, the
specific optical quality should not be compared to single float or
laminated pvb glazing. Consult InterEdge for specific acceptable quality
standards before purchase. |
Guarantee
Manufacturer, (AGC Flat Glass Europe) guarantees
the characteristics of Pyrobel for a period of 5 years from date of
delivery. Due to the nature of its interlayers, Pyrobel may develop some
minor imperfections such as small bubbles or a slight distortion which
will not affect the free vision through the glazing or fire performance.
A variation of up to 5% of light transmission or haze shall not be
considered a defect. This guarantee is for replacement of glass only and
any other costs associated with the removal or replacement of defective
units are not the responsibility of the manufacturer. The guarantee
shall apply only to glass handled, transported, stored and installed in
accordance with normal procedures. |
