| |
TEMP. RISE DOORS |
NON-TEMP. RISE DOORS |
SIDELITES, TRANSOMS AND WINDOWS |
| Width |
12" |
36" |
76" |
| Height |
33" |
76" |
76" |
| Square Inches (Max.) |
100" |
2736" |
3202" |
| Stop Height |
5/8" |
5/8" |
5/8" |
| |
TEMP. RISE DOORS |
NON-TEMP. RISE DOORS (to 60 min.) |
NON-TEMP. RISE DOORS (to 90 min.) |
SIDELITES, TRANSOMS AND WINDOWS (to 60 min.) |
SIDELITES, TRANSOMS AND WINDOWS (to 90 min.) |
| Width |
12" |
36" |
36" |
66" |
66" |
| Height |
33" |
76" |
66" |
76" |
66" |
| Square Inches (Max.) |
100" |
2736" |
2376" |
2786" |
2786" |
| Stop Height |
3/4" |
3/4" |
3/4" |
3/4" |
3/4" |
Listings
Listed and labeled by Underwriters Laboratories, Inc. for the United
States and Canada with File No. R22036 (Schott) and R192161
(InterEdge). All fire tests performed in accordance with UL-9, Ul-10B,
UL-10C, ASTM E-2010, ASTM E-2074, NFPA-252, NFPA-257, UBC 7-2, UBC 7-4,
CAN4-S104, and CAN4-S106. |
Labeling
All products are labeled bearing the manufacturers name, testing
laboratory, rating and safety standards. |
Specifications
All glazing shall be designated on the drawings as 3/16" or 5/16" Pyran
supplied
by AGC InterEdge Technologies. Specify product as Pyran Star, Pyran Star-F,
Pyran Star-L,
Pyran Crystal, or Pyran Crystal-F, as required for the application. |
PYRAN Star and PYRAN Crystal
|
PYRAN Star-F and PYRAN Crystal-F |
PYRAN Star-L
|
| Thickness |
3/16" (5mm) |
3/16" (5mm) |
5/16" (8mm) |
| Weight (per sq. ft) |
2.5 lbs/sq. ft. |
2.5 lbs/sq. ft. |
4.0 lbs/sq. ft. |
| Light transmission |
87% |
85% |
80% |
| Safety rating |
None |
ANSI Z97.1 and CPSC 16 CFR 1201 (Cat. II) |
| Fire rating |
20 minutes to 90 minutes |
| Surface Finish |
Unpolished |
Quality Standard
PYRAN is a specially developed glass-ceramic that fulfills the fire
protective rating requirements. The production process may involve
certain optical imperfections, such as bubbles or knots. Since these do
not generally impair the transparency or the technicla performance of
the glass, they do not represent cause for rejection or replacement.
Failure to comply with any of the storage, handling, installation and/or
care guidelines may result in a loss of warranty. |
Installation and Care
PYRAN shall only be installed into listed fire rated frame and window
assemblies and glazed using Pemko FG3000S90 glazing tape and calcium
silicate setting blocks. Each piece of Pyran should be inspected
carefully before installation and any pieces with visible edge or
surface damage should be sorted out. The stop height has to be chosen
according to the Pyran listing and the installation of the framed unit
must comply with the frame supplier's instructions. To maintain the
aesthetics it is important to keep the glass
clean. A soft, clean non-abrasive cloth and mild soap, detergent or
non-abrasive window cleaning solution is suitable for cleaning. After
cleaning, rinse immediately with clean water and remove any excess water
from the glass surface. Also, do not allow any metal or hard part of the
cleaning equipment to come in contact with the glass surface. |
Storage and Handling
PYRAN fire-protective glass should be separated by an appropriate
material (e.g. acid-free tissue paper) and should be handled with care
during transportation storage, inspection and installation. In addition,
the glass should be stacked upright and separated by an appropriate
material. The bottom edge myst be supported by an appropriate material
along its entire length. |
